^Syntax
OperatorExpression :
      BorrowExpression
   | DereferenceExpression
   | ErrorPropagationExpression
   | NegationExpression
   | ArithmeticOrLogicalExpression
   | ComparisonExpression
   | LazyBooleanExpression
   | TypeCastExpression
   | AssignmentExpression
   | CompoundAssignmentExpression

Operators are defined for built in types by the Rust language. Many of the following operators can also be overloaded using traits in std::ops or std::cmp.

Integer operators will panic when they overflow when compiled in debug mode. The -C debug-assertions and -C overflow-checks compiler flags can be used to control this more directly. The following things are considered to be overflow:

• When +, * or - create a value greater than the maximum value, or less than the minimum value that can be stored. This includes unary - on the smallest value of any signed integer type.
• Using / or %, where the left-hand argument is the smallest integer of a signed integer type and the right-hand argument is -1.
• Using << or >> where the right-hand argument is greater than or equal to the number of bits in the type of the left-hand argument, or is negative.

^Syntax
BorrowExpression :
      (&|&&) Expression
   | (&|&&) mut Expression

The & (shared borrow) and &mut (mutable borrow) operators are unary prefix operators. When applied to a place expression, this expressions produces a reference (pointer) to the location that the value refers to. The memory location is also placed into a borrowed state for the duration of the reference. For a shared borrow (&), this implies that the place may not be mutated, but it may be read or shared again. For a mutable borrow (&mut), the place may not be accessed in any way until the borrow expires. &mut evaluates its operand in a mutable place expression context. If the & or &mut operators are applied to a value expression, then a temporary value is created.

These operators cannot be overloaded.

# #![allow(unused_variables)]
#fn main() {
{
    // a temporary with value 7 is created that lasts for this scope.
    let shared_reference = &7;
}
let mut array = [-2, 3, 9];
{
    // Mutably borrows `array` for this scope.
    // `array` may only be used through `mutable_reference`.
    let mutable_reference = &mut array;
}
#}

Even though && is a single token (the lazy 'and' operator), when used in the context of borrow expressions it works as two borrows:

# #![allow(unused_variables)]
#fn main() {
// same meanings:
let a = &&  10;
let a = & & 10;

// same meanings:
let a = &&&&  mut 10;
let a = && && mut 10;
let a = & & & & mut 10;
#}

^Syntax
DereferenceExpression :
   * Expression

The * (dereference) operator is also a unary prefix operator. When applied to a pointer it denotes the pointed-to location. If the expression is of type &mut T and *mut T, and is either a local variable, a (nested) field of a local variance or is a mutable place expression, then the resulting memory location can be assigned to. Dereferencing a raw pointer requires unsafe.

On non-pointer types *x is equivalent to *std::ops::Deref::deref(&x) in an immutable place expression context and *std::ops::Deref::deref_mut(&mut x) in a mutable place expression context.

# #![allow(unused_variables)]
#fn main() {
let x = &7;
assert_eq!(*x, 7);
let y = &mut 9;
*y = 11;
assert_eq!(*y, 11);
#}

^Syntax
ErrorPropagationExpression :
   Expression ?

The question mark operator (?) unwraps valid values or returns errornous values, propagating them to the calling function. It is a unary postfix operator that can only be applied to the types Result<T, E> and Option<T>.

When applied to values of the Result<T, E> type, it propagates errors. If the value is Err(e), then it will return Err(From::from(e)) from the enclosing function or closure. If applied to Ok(x), then it will unwrap the value to evaulate to x.

# #![allow(unused_variables)]
#fn main() {
# use std::num::ParseIntError;
fn try_to_parse() -> Result<i32, ParseIntError> {
    let x: i32 = "123".parse()?; // x = 123
    let y: i32 = "24a".parse()?; // returns an Err() immediately
    Ok(x + y)                    // Doesn't run.
}

let res = try_to_parse();
println!("{:?}", res);
# assert!(res.is_err())
#}

When applied to values of the Option<T> type, it propagates Nones. If the value is None, then it will return None. If applied to Some(x), then it will unwrap the value to evaluate to x.

# #![allow(unused_variables)]
#fn main() {
fn try_option_some() -> Option<u8> {
    let val = Some(1)?;
    Some(val)
}
assert_eq!(try_option_some(), Some(1));

fn try_option_none() -> Option<u8> {
    let val = None?;
    Some(val)
}
assert_eq!(try_option_none(), None);
#}

? cannot be overloaded.

^Syntax
NegationExpression :
      - Expression
   | ! Expression

These are the last two unary operators. This table summarizes the behavior of them on primitive types and which traits are used to overload these operators for other types. Remember that signed integers are always represented using two's complement. The operands of all of these operators are evaluated in value expression context so are moved or copied.

* Only for signed integer types.

Here are some example of these operators

# #![allow(unused_variables)]
#fn main() {
let x = 6;
assert_eq!(-x, -6);
assert_eq!(!x, -7);
assert_eq!(true, !false);
#}

^Syntax
ArithmeticOrLogicalExpression :
      Expression + Expression
   | Expression - Expression
   | Expression * Expression
   | Expression / Expression
   | Expression % Expression
   | Expression & Expression
   | Expression | Expression
   | Expression ^ Expression
   | Expression << Expression
   | Expression >> Expression

Binary operators expressions are all written with infix notation. This table summarizes the behavior of arithmetic and logical binary operators on primitive types and which traits are used to overload these operators for other types. Remember that signed integers are always represented using two's complement. The operands of all of these operators are evaluated in value expression context so are moved or copied.

* Arithmetic right shift on signed integer types, logical right shift on unsigned integer types.

Here are examples of these operators being used.

# #![allow(unused_variables)]
#fn main() {
assert_eq!(3 + 6, 9);
assert_eq!(5.5 - 1.25, 4.25);
assert_eq!(-5 * 14, -70);
assert_eq!(14 / 3, 4);
assert_eq!(100 % 7, 2);
assert_eq!(0b1010 & 0b1100, 0b1000);
assert_eq!(0b1010 | 0b1100, 0b1110);
assert_eq!(0b1010 ^ 0b1100, 0b110);
assert_eq!(13 << 3, 104);
assert_eq!(-10 >> 2, -3);
#}

^Syntax
ComparisonExpression :
      Expression == Expression
   | Expression != Expression
   | Expression > Expression
   | Expression < Expression
   | Expression >= Expression
   | Expression <= Expression

Comparison operators are also defined both for primitive types and many type in the standard library. Parentheses are required when chaining comparison operators. For example, the expression a == b == c is invalid and may be written as (a == b) == c.

Unlike arithmetic and logical operators, the traits for overloading the operators the traits for these operators are used more generally to show how a type may be compared and will likely be assumed to define actual comparisons by functions that use these traits as bounds. Many functions and macros in the standard library can then use that assumption (although not to ensure safety). Unlike the arithmetic and logical operators above, these operators implicitly take shared borrows of their operands, evaluating them in place expression context:

a == b;
// is equivalent to
::std::cmp::PartialEq::eq(&a, &b);

This means that the operands don't have to be moved out of.

Here are examples of the comparison operators being used.

# #![allow(unused_variables)]
#fn main() {
assert!(123 == 123);
assert!(23 != -12);
assert!(12.5 > 12.2);
assert!([1, 2, 3] < [1, 3, 4]);
assert!('A' <= 'B');
assert!("World" >= "Hello");
#}

^Syntax
LazyBooleanExpression :
      Expression || Expression
   | Expression && Expression

The operators || and && may be applied to operands of boolean type. The || operator denotes logical 'or', and the && operator denotes logical 'and'. They differ from | and & in that the right-hand operand is only evaluated when the left-hand operand does not already determine the result of the expression. That is, || only evaluates its right-hand operand when the left-hand operand evaluates to false, and && only when it evaluates to true.

# #![allow(unused_variables)]
#fn main() {
let x = false || true; // true
let y = false && panic!(); // false, doesn't evaluate `panic!()`
#}

^Syntax
TypeCastExpression :
   Expression as PathInExpression

A type cast expression is denoted with the binary operator as.

Executing an as expression casts the value on the left-hand side to the type on the right-hand side.

An example of an as expression:

# #![allow(unused_variables)]
#fn main() {
# fn sum(values: &[f64]) -> f64 { 0.0 }
# fn len(values: &[f64]) -> i32 { 0 }
fn average(values: &[f64]) -> f64 {
    let sum: f64 = sum(values);
    let size: f64 = len(values) as f64;
    sum / size
}
#}

as can be used to explicitly perform coercions, as well as the following additional casts. Here *T means either *const T or *mut T.

* or T and V are compatible unsized types, e.g., both slices, both the same trait object.

• Numeric cast
  • Casting between two integers of the same size (e.g. i32 -> u32) is a no-op
  • Casting from a larger integer to a smaller integer (e.g. u32 -> u8) will truncate
  • Casting from a smaller integer to a larger integer (e.g. u8 -> u32) will
    • zero-extend if the source is unsigned
    • sign-extend if the source is signed
  • Casting from a float to an integer will round the float towards zero
    • NOTE: currently this will cause Undefined Behavior if the rounded value cannot be represented by the target integer type. This includes Inf and NaN. This is a bug and will be fixed.
  • Casting from an integer to float will produce the floating point representation of the integer, rounded if necessary (rounding strategy unspecified)
  • Casting from an f32 to an f64 is perfect and lossless
  • Casting from an f64 to an f32 will produce the closest possible value (rounding strategy unspecified)
    • NOTE: currently this will cause Undefined Behavior if the value is finite but larger or smaller than the largest or smallest finite value representable by f32. This is a bug and will be fixed.
• Enum cast
  • Casts an enum to its discriminant, then uses a numeric cast if needed.
• Primitive to integer cast
  • false casts to 0, true casts to 1
  • char casts to the value of the code point, then uses a numeric cast if needed.
• u8 to char cast
  • Casts to the char with the corresponding code point.

^Syntax
AssignmentExpression :
   | Expression = Expression

An assignment expression consists of a place expression followed by an equals sign (=) and a value expression.

Evaluating an assignment expression drops the left-hand operand, unless it's an unitialized local variable or field of a local variable, and either copies or moves its right-hand operand to its left-hand operand. The left-hand operand must be a place expression: using a value expression results in a compiler error, rather than promoting it to a temporary.

# #![allow(unused_variables)]
#fn main() {
# let mut x = 0;
# let y = 0;
x = y;
#}

^Syntax
CompoundAssignmentExpression :
      Expression += Expression
   | Expression -= Expression
   | Expression *= Expression
   | Expression /= Expression
   | Expression %= Expression
   | Expression &= Expression
   | Expression |= Expression
   | Expression ^= Expression
   | Expression <<= Expression
   | Expression >>= Expression

The +, -, *, /, %, &, |, ^, <<, and >> operators may be composed with the = operator. The expression place_exp OP= value is equivalent to place_expr = place_expr OP val. For example, x = x + 1 may be written as x += 1. Any such expression always has the unit type. These operators can all be overloaded using the trait with the same name as for the normal operation followed by 'Assign', for example, std::ops::AddAssign is used to overload +=. As with =, place_expr must be a place expression.

# #![allow(unused_variables)]
#fn main() {
let mut x = 10;
x += 4;
assert_eq!(x, 14);
#}